RSVPing is closed at this time.
PMC Quality Webinar Series: FMEA Excellence: Part 2 FMEA (Failure Mode and Effects Analysis) is an analytical methodology used to ensure that potential problems have been considered and addressed throughout the
PMC Quality Webinar Series: FMEA Excellence: Part 2
FMEA (Failure Mode and Effects Analysis) is an analytical methodology used to ensure that potential problems have been considered and addressed throughout the product and process development process (APQP). Each FMEA should ensure that attention is given to every component within the product or assembly, where critical and safety-related components or processes should be given a higher priority. The focus of this webinar is PFMEA (Process Failure Mode and Effects Analysis).
PMC offers FMEA Training that covers APQP to FMEA linkage, Inputs from APQP to PFMEA & Process Flow Diagram, Developing a Process FMEA, and PFMEA to Control Plan Linkage along with its applications to manufacturing.
FMEA is meant to be a “before-the-event” action not an “after-the-fact” exercise. Even though Design and Process FMEAs are the most commonly used ones, the six FMEAs are;
- Design FMEA
- Process FMEA
- Concept FMEA
- System FMEA
- Process Concept FMEA
- Machine FMEA
Automotive Quality Core Tools, also known as Quality Core Tools or just simply Core Tools are key pillars of an effective quality management system. Over 30 years ago, AIAG (Automotive Industry Action Group) and ASQ (American Society of Quality) collaborated with the domestic automotive manufacturers Ford, GM, and Chrysler (now FCA) to establish collective quality methods and tools, which became known as the Quality Core Tools. Other manufacturing sectors including aerospace, defense, medical, consumer products, transportation, and pharmaceutical adapted these tools over time.
Most automotive manufacturers and suppliers require use of one or more of the Core Tools. Therefore, organizations whose employees have mastered the Core Tool processes can assure their customers that the industry’s most qualified individuals are working on their behalf, and that IATF 16949 and applicable quality reference manual requirements will be met without fail.
PMC offers Core Tools Training that covers all tools including Advanced Product Quality Planning & Control Plan (APQP), Production Part Approval Process (PPAP), Failure Mode and Effects Analysis (FMEA), Statistical Process Control (SPC), and Measurement System Analysis (MSA) or provides training for each tool individually. https://bit.ly/3ixCF5j
Additional PMC Quality Services:
Operational Excellence is the execution of the business strategy more consistently and reliably than the competition and it is evidenced by results. Operational Excellence integrates management philosophies and methodologies to reach Excellence. However, most of its drivers are based on earlier continuous improvement methodologies, such as Lean Thinking, Six Sigma and Scientific Management. For more information click here: https://bit.ly/383yV9U
International Standards Are A quality management system (QMS) is a set of policies, processes and procedures required for planning and execution (production / development / service) in the core business area of an organization (i.e., areas that can impact the organization’s ability to meet customer requirements). https://bit.ly/3oRt9Ot
Auditing from PMC offers to develop, implement, conduct, and sustain the internal and 2nd Party auditing programs https://bit.ly/3elXQqn.
PMC provides internal and lead auditor training and certification for:
- IATF 16949:2016 – Automotive Quality Management System
- Quality Management System – ISO 9001:2015
- ISO 14001:2015 – Environmental Management System
- Occupational Health and Safety System – ISO 45001:2018
- ESD S20.20:2014 – Electro Static Discharge (ESD) Standard
- VDA 6.3 – German Automotive Quality Standard
Other PMC Services:
Laser Scanning & 3D Modeling: https://bit.ly/3iY6LQg
Facility Layout & Material Flow Optimization: https://bit.ly/2SgLZQ1
Manufacturing Productivity: https://bit.ly/3ioGmd8
Program Management: https://bit.ly/2HDTA9d
Quality Assessment & Roadmap: https://bit.ly/3m4339L
More Information On PMC Can Be Found Below:
Follow our other social channels:
PMC, Your Partner In Productivity Improvement!
(Thursday) 11:00 am - 12:00 pm ET