- Date
- July 14, 2022
Mohan Mano Hassan (a), Sai Priyanka Kalamraju(a), Sandeep Dangeti(a), Sirisha Pudipeddi(a), Edward J Williams(a) Business Analytics, College of Business, University of Michigan – Dearborn, Dearborn, MI, […]- Date
- July 14, 2022
Daniel Zemaitis1,*, Angela Green1,Alexandra Mukavitz1, Jennifer Dhanapal1, Myriah Kahlmorgan1, and Edward J. Williams11University of Michigan –Dearborn, 19000 Hubbard Drive, Dearborn, Michigan, 48126, USA*Corresponding author. Email address: […]- Date
- July 14, 2022
All authors contributed equally in the preparation of this manuscript and declare no conflict of interest. Abstract Urban population growth and urbanization require technological innovation in […]- Date
- July 14, 2022
Sapthagirishwaran Thennal Sivaramakrishnan, Shanmugasundaram Chandrasekaran, Jennifer Dhanapal, Paul Ajaydivyan Jeya Sekar, Edward J. Williams Decision Science, College of Business University of Michigan – Dearborn Fairlane Center […]- Date
- July 14, 2022
Ganapathi Baliada Ramesh(a), Brittany Harju(a), Daniel Scipione(a), Kristina Vujic(a) ,Edward J Williams(a) (a)Business Analytics, College of Business, University of Michigan – Dearborn, Dearborn, MI, USA (a)[email protected], […]- Date
- July 14, 2022
Proceedings of the International Conference on Industrial Engineering and Operations Management Sao Paulo, Brazil, April 6-8, 2021 Wenqi Deng, Yang Yang, Di Zhao, and Edward […]- Date
- July 14, 2022
Hamza A. Abdelrahman Department of Engineering Management University of Dayton 300 College Park Dayton, OH 45469 Edward J. Williams College of Business, University of Michigan […]- Date
- July 14, 2022
Caitlin Pethers, Marie Ruesga, Parker Moesta, and Edward J Williams Business Analytics, College of Business, University of Michigan – Dearborn Dearborn, MI, 48126, USA [email protected], [email protected], […]- Date
- June 28, 2022
Naomie Bartoli , Roberto Revetria, Emanuele Morra , Gabriele Galli and Edward Williams Department of Mechanical Engineering, University of Genoa, Via Opera Pia 15, Genoa, 16145, […]- Date
- June 15, 2022
MODELING OF CHAIN CONVEYORS AND THEIR EQUIPMENT INTERFACES Ali K. Gunal Shigeru Sadakane Production Modeling Corporation Three Parklane Boulevard, Suite 910 West Dearborn, Michigan 48126, […]- Date
- June 6, 2022
Onur M. Ulgen, PhD University of Michigan, Dearborn and Production Modeling Corporation, Dearborn, MI Simulation methodology in Practice Simulation guidelines Technical guidelines Managerial guidelines Elements of […]- Date
- December 21, 2014
SIMULATION ATTACKS MANUFACTURING CHALLENGES Edward J. Williams PMC 15726 Michigan Avenue Dearborn, MI 48126 USA ABSTRACT All during the past half-century, the environment of […]- Date
- November 21, 2013
SIMULATION VALIDATES DESIGN AND SCHEDULING OF A PRODUCTION LINE Vidyasagar Murty | Neelesh A. Kale | Rohit Trivedi | Onur M. Ülgen | Edward J. Williams […]- Date
- November 20, 2013
SIMULATION IMPROVES MANUFACTURE AND MATERIAL HANDLING OF FORGED METAL COMPONENTS Teresa Lang | Edward J. Williams | Onur M. Ülgen Industrial & Manufacturing Systems Engineering Department […]- Date
- December 19, 2012
PITFALLS IN MANAGING A SIMULATION PROJECT Edward J. Williams & Onur M. Ülgen 131B Fairlane Center South PMC College of Business University of Michigan – Dearborn […]- Date
- May 19, 2012
DEVELOPMENT AND USE OF A GENERIC AS/RS SIZING SIMULATION MODEL Srinivas Rajanna Edward Williams Onur M. Ülgen PMC 15726 Michigan Avenue Dearborn, MI 48126 USA Vaibhav […]- Date
- September 11, 2011
SIMULATION HELPS ASSESS AND INCREASE AIRPLANE MANUFACTURING CAPACITY Marcelo Zottolo, Edward J. Williams, Onur M. Ülgen PMC 15726 Michigan Avenue Dearborn, Michigan 48126 USA […]- Date
- July 20, 2011
SIMULATION INCREASES EFFICIENCY OF ENGINE AIR-LEAK TESTING Ravi Lote | Edward J. Williams | Onur M. Ülgen PMC 15726 Michigan Avenue Dearborn, Michigan 48126 U.S.A ABSTRACT […]- Date
- January 20, 2011
EVALUATING THE PERFORMANCE OF A COMPLEX POWER AND FREE CONVEYOR SYSTEM IN A FLEXIBLE MANUFACTURING ENVIRONMENT Ashish Devikar | Karthik Vasudevan | Nikhil Garge […]- Date
- January 21, 2010
HIGH SPEEDBOTTLE MANUFACTURING LINES: CASE STUDIES AND SIMULATION SOFTWARE SELECTION TECHNIQUES Karthik Vasudevan | Ravi Lote | Edward Williams | Onur Ulgen ABSTRACT Simulation Engineers […]- Date
- October 21, 2009
SIMULATION OF MEDICAL LABORATORY OPERATIONS TO ACHIEVE OPTIMAL RESOURCE ALLOCATION Ravindra Lote | Edward J. Williams | Onur M. Ülgen PMC 15726 Michigan Avenue Dearborn, MI […]